Semi-Industrial Microwave-Assisted Extraction of an Alizarin-Rich Extract from Rubia tinctorum Roots: Process Development and UV–Vis/HPLC Characterization | ||
| Advances in Pharmacology and Therapeutics Journal | ||
| Articles in Press, Accepted Manuscript, Available Online from 21 November 2026 PDF (574.42 K) | ||
| Document Type: Original Article | ||
| Authors | ||
| Mohsen Askarbioki* 1; Seyed Mohammad Mosavi Hasanabad2; Mahdi Eslami3; Seyed Pezhman Shirmardi4; Abdolhamid Amooee5; Saeed Kargar5 | ||
| 1Nuclear Science and Technology Research Institute (NSTRI), Tehran, Iran | ||
| 2Royan Technology Padideh Pardis Company, Yazd, Iran | ||
| 3M.Sc. student, Department of Business Management, Yazd Branch, Islamic Azad University, Yazd, Iran | ||
| 4Radiation Application Research School, Nuclear Science and Technology Research Institute (NSTRI), P.O.Box: 14395-836, Tehran, Iran | ||
| 5Department of General Surgery, Faculty of Medicine, Shahid Sadoughi University of Medical Sciences and Health Services, Yazd, Iran | ||
| Abstract | ||
| Abstract Introduction: This study evaluates a semi-industrial microwave-assisted extraction (MAE) system for recovering an alizarin-rich extract from Rubia tinctorum roots. Methods: A semi-industrial microwave extractor (IRAD-MEEO-140109) was used with ethanol/water (3:7 v/v). To minimize thermal degradation risk, controlled irradiation cycles and temperature (up to 60 °C) were applied. Optical properties were evaluated by UV–Vis, and relative purity was assessed by HPLC-UV against a Merck standard. Results: The extraction showed good reproducibility (n = 3, RSD < 10% for yield and peak height). From 400 g of plant material, 76 g of dried extract was obtained (yield 19% w/w). Alizarin content and absolute recovery were not determined. UV–Vis measurements were performed once per concentration (n = 1), while extraction and HPLC were triplicate (n = 3). UV–Vis showed peaks at ~330 and 420 nm. HPLC showed a major peak assigned to alizarin (tR = 2.9 min) with ~75% relative chromatographic area purity. Total energy consumption was estimated at 0.48 kWh (1.2 kWh/kg). A theoretical comparison with reflux extraction suggests lower energy demand; however, this is approximate and not experimentally validated. Conclusion: This study provides a process development framework for semi-industrial MAE of alizarin, serving as a basis for future studies rather than a demonstration of therapeutic or industrial applicability. | ||
| Keywords | ||
| Alizarin; Rubia tinctorum; Microwave-assisted extraction; Semi-industrial extraction; HPLC characterization; Anthraquinones | ||
|
Statistics Article View: 8 PDF Download: 10 |
||